Editors in Chief: Dr. Suhas Deshmukh & Dr.Minati Mishra
ISSN online:
ISSN print: 2321-5747
6 issues per year

International Journal on Mechanical Engineering and Robotics (IJMER) is a scholarly journal which offers prompt publication of articles covering experimental, numerical and theoretical investigations which give insight into the major areas of mechanical, thermal and fluid engineering. This journal publishes high level student texts, explanation and dissemination of technology and good practice, through to interesting and important research that is immediately relevant to industrial development or practice

Area to be Covered

The broad spectrum of the journal includes the topic but not limited to:

  • Design theory and approaches
  • Innovative mechanisms
  • Mathematical and computational issues
  • More on this Journal...
  • Kinematics and dynamics
  • Performance mapping and optimisation
  • Reconfiguration and sustainability
  • Hardware and systems
  • Calibration
  • Intelligent robotic instrumentation and measurement
  • Motion planning and control
  • Human-robot interfaces
  • Perception and machine learning
  • Robotic machine tools and manufacturing systems
  • Micro- and nano-robotics
  • Flexible/compliant/hybrid/bio-inspired robots
  • Atomistic modelling
  • Nanomechanics, micromechanics
  • Eigenstrain theory
  • Thin films
  • MEMS
  • NEMS
  • Residual and thermal stresses
  • Materials
  • Finite-element modelling
  • Constitutive modelling and phenomenology
  • Elasticity, plasticity, viscoelasticity, viscoplasticity
  • Experimental mechanics
  • Laminar flow, multi-phase flow
  • Turbulence
  • Mechanics-based engineering systems design
  • General mechanics
  • GeomechanicsHealth and Safety
  • Heat and Mass Transfer
  • HVAC
  • Instrumentation and Control
  • Internal Combustion Engines
  • Machinery and Machine Design
  • Manufacturing and Production Processes
  • Marine System Design
  • Material Engineering
  • Material Science and Processing
  • Mechanical Design
  • Mechanical Power Engineering
  • Engineering Education and Training
  • Facilities Planning and Management
  • Global Manufacturing and Management
  • Human Factors
  • Information Processing and Engineering
  • Intelligent Systems
  • Manufacturing Systems
  • Operations Research
  • Production Planning and Control
  • Project Management
  • Quality Control and Management
  • Reliability and Maintenance Engineering
  • Safety, Security and Risk Management

Service Innovation and Management

 


Objective

International Journal on Mechanical Engineering and Robotics (IJMER) is a scholarly journal which offers prompt publication of articles covering experimental, numerical and theoretical investigations which give insight into the major areas of mechanical, thermal and fluid engineering. This journal publishes high level student texts, explanation and dissemination of technology and good practice, through to interesting and important research that is immediately relevant to industrial development or practice.

ReadershipContent

IJMER is a refereed international journal, published 6 issues per year, providing an international forum and an authoritative source of information in the field of Mechanical Engineering,Intelligent robotic instrumentation and measurement,Human-robot interfaces,Nanomechanics, micromechanics and Mechanical Power Engineering.

Editorial Board :: IJMER

Editor – in-Chief

Dr. Suhas Deshmukh
Professor, Mechanical Engineering Department,
Sinhgad Academy of Engineering,
Kondhawa(Bk), Pune

&

Dr.Minati Mishra
Lecture, Information & Communication Technology Department,
Fakir Mohan University ,
Balasore, Odissa

 

Associate Editor- in-Chief

Prof. Dipti Prasad Mishra
(M.Tech., Ph.D, Thermal Engg. (IIT, Kharagpur))
Associate Professor & HOD
Institute of Technical Education & Research
Jagamohan Nagar, Khandagiri
Bhubaneswar – 751030, India
Email: diptimishra@iter.ac.in

Members of the Editorial Board

Akash Kumar Bhoi
Asst. Professor
Department of Applied Electronics & Instrumentation Engineering
SIKKIM MANIPAL INSTITUTE OF TECHNOLOGY (SMIT)
Majitar, Rangpo, E – Sikkim, 737136

Zaki Ahmad
Department of Mechanical Engineering,
KFUPM,Box # 1748,
Dhaharan 31261 Saudi Arabia

Rajeev Ahuja
Physics Department,Uppsala University,
Box 530, 751 21 Uppsala Sweden

B.T.F. Chung
Department of Mechanical Engineering,
University of Akron, Akron,
Ohio 44325 USA

S.Z. Kassab  Mechanical Engineering Department,
Faculty of Engineering,
Alexandria University, Alexandria, 21544 Egypt,

Prof. Daniel Benevides da Costa
Federal University of Ceara (UFC)
Brazil

Prof. A.Cagatay Talay
Istanbul Technical University
Turky

Ashraf Shikdar
Department of Mechanical & Industrial Engineering,
S.Q. University,P.O  Box 33, Al-Khod 123 Oman

Author Guidelines :: IJMER

Submitted papers should not have been previously published nor be currently under consideration for publication elsewhere. (N.B.Conference papers may only be submitted if the paper has been completely re-written and the author has cleared any necessary permission with the copyright owner if it has been previously copyrighted). All authors must declare they have read and agreed to the content of the submitted manuscript. A full statement of our Ethical Guidelines for Authors is available. All authors must declare they have read and agreed to the content of the submitted manuscript. A full statement of our Ethical Guidelines for Authors is available.

All papers are refereed through a double blind process. A guide for authors, sample copies and other relevant information for submitting papers are available on the Submission of Papers web-page.

You may send one copy in the form of an MS Word file attached to an e-mail (details of file formats in Author Guidelines) to Dr. Suhas Deshmukh

Submitted papers will be followed through a double blind peer review process by technical committees of the Conference.

Back to Top
Developed & Maintained By Ratna Technology IRD India © 2014 | All Rights Reserved